WS02 Tree Watering System
- Free Shipping *

We recommend you make a fresh 2" cut from the base of your tree immediately before you place it in water & maintain your water level every day as done in the test below conducted by the NIST fire safety engineers.

A WET TREE IS A SAFE TREE!**
Wet trees tell a different story. For comparative purposes, the NIST fire safety engineers selected a green Scotch pine, had it cut in their presence, had an additional two inches cut from the trunk's bottom, and placed the tree in a stand with at least a 7.6 liter ( appx. 2 U.S. gallons) water capacity. The researchers maintained the Scotch pine's water on a daily basis. A single match could not ignite the tree. A second attempt in which an electric current ignited an entire matchbook failed to fire the tree. Finally they applied an open flame to the tree using a propane torch. The branches ignited briefly, but self-extinguished when the researchers removed the torch from the branches. As NIST fire safety engineers say: REMEMBER, A WET TREE IS A SAFE TREE!

Click To Enlarge	"they applied an open flame to the tree using a propane torch. The branches ignited briefly, but self-extinguished when the researchers removed the torch from the branches."
Photograph of Tree After Ignition Attempt During NIST Test No. 8 as it appears in report FR 4010 conducted by the National Institute of Standards and Technology

View HTML file of full NIST Report of Test FR 4010

USFA Web Site U.S. Fire Administration
NIST National Institute of Standards and Technology